This is an 8-bit high-speed digital to analog converter module. This module has two independent DAC channels. The output amplitude of digital to analog converter modules is programmable. The output is jumper selected for either unipolar or bipolar mode. In unipolar mode the output is programmable from 0 to +5volts.

In bipolar mode the output is programmable approximately ±2.5volts. The outputs are buffered through amplifiers. A set of 8 LEDs per channel monitor, the data arriving at the input of each DAC. This information is useful to know the output status of DAC.

Specifications:

• 8-BIT programmable digital to analog converter on two independent channels.
  
• Outputs of each channel buffered.
  
• Unipolar or bipolar outputs by jumper selection.
  
• In unipolar mode the output is 0-5V DC. In bipolar mode, the output is ±2.5V DC.
  
• 16 LEDs monitor the status of Data to two DACs. I.e., 8 LEDs per DAC channel.
  
• Assembled in an elegant sloping cabinet.
  
• Built-in power supply.

Note: This experimental module can be interfaced to all Microprocessor trainers, Micro control trainers or IBM PC Add – on card Model: IBL-IBR-1.