Specifications: This trainer is a single glass epoxy printed circuit board with legends neatly screen printed in multi colour on the front side and all the components are soldered back side of the pcb to avoid tampering fixed components like resistors, capacitors, transistors, diodes, and variable components like potentiometers are mounted on the front side of the PCB for making linear measurements.

Technical specifications

D.C. POWER SUPPLY:
Fixed Voltages: +5V/1A, +15V/250mA, -15V/250mA are provided in this trainer.
Variable Voltages: +(0-15)V/250mA, +(1.2V-30)V/250mA and -(1.2V-30)V/250mA are provided in this trainer. Voltage can be varied using the relevant potentiometer.

A.C. Voltage: (30-0-30)V/50Hz A.C. voltage is provided.
Output Waveforms: Sine, Square, Triangle, Ramp, Pulse wave forms are provided across output and GND.
Amplitude Control: Amplitude of the signal is varied using "Amplitude Control from (0-10)V.

Frequency Control: Frequency can be linearly varied using frequency control.

Frequency Selector: Frequency can be selected by using frequency selector.

x1 2Hz - 20Hz
x10 20Hz - 200Hz
x100 200Hz - 2000Hz
x1K 2KHz - 20KHz
x10K 20KHz - 200KHz

Function Select: Sine , Square , Triangle , Ramp and Pulse waveforms can be selected with this selector.

TTL Output: TTL level (3.6)V square wave output can be taken across TTL O/P and GND.

DIGITAL MULTIMETER: Electronic Work Station is provided with 3.5" digit DMM for measuring various voltages.

COMPONENTS: Fixed components like Higher wattage Resistors, Capacitors, Germanium diodes, Silicon diodes, Zener diodes, Potentiometers, FET, MOSFET, LDR, Photo diode, Photo transistor are uncommitted for the students to do patching.

EXPERIMENTAL BOARD: Experimental board is provided for the user to conduct various experiments in digital and linear Electronics by means of using external components. Various inputs and outputs can be taken from 'Electronic Work Station" which is provided in the trainer.

INPUTS AND OUTPUTS: 4 logic switches are provided for giving inputs, LEDs are provided for monitoring the logic outputs.

HOUSING: Electronic Work Station is elegantly fabricated and housed in a metal cabinet.

DIMENSION: 48cms x 13cms x 41.5cms

WEIGHT: (Approx.) 2 KG

POWER: 230V/50Hz A.C. Mains operated