Ergonomically DEsigned for best Man / Machine Interaction

▫ Support Tensile, Compression, Bending, Shear and so on .
▫ Printer / Plotter Interface .
▫ Max . Safety
▫ Pressure Transducer with International Traceability.
▫ μp Based / PC Based option

▫ Loading accuracy as high as! 1 %
▫ Straining rate to cover a wide range of materials.
▫ Continuous roll type load elongation recorder.
▫ High reading accuracy due to large size and design of dial.
▫ Simple control to facilitate ease of operation.
▫ Fully enclosed and protected load measuring system.
▫ Wide range of standard and special accessories including load stabilizer.
▫ Robust straining frame.
▫ Suitable for standard specimen and also structures.
▫ Motorised UP/DOWN movement of lower crosshead to enable easy and rapid fixing of test specimen.

APPLICATION :

VENUS Universal Testing Machine is designed to perform tensile, compression, bending and shear tests on metal & other materials, both in the form ottest pieces and as finished products.

PRINCIPLE OF OPERATION :

The test specimen is subjected to load with hydraulic system and is measured precisely with pendulum dynamometer.
Load is applied by hydrostatically lubricated ram. The oil Pressure in the main cylinder is transmitted to the cylinder of the pendulum dynamometer housed in the control panel. The dynamometer piston exterts a force propotionate to the hydraulic pressure. This force is transferred through a leverage system to a pendulum. Displacement of pendulum actuates the rack and pinion mechanism which operates the load indicating pointer. Return movement of pendulum is effectively damped to absorb energy in the event of sudden brakage of specimen .

Machine comprises of the following :

STRAINING UNIT :
This consists of a hydraulic cylinder & piston mounted on a robust base. The loading me consists of an upper crosshead, middle )sshead and lower table.me upper crosshead and lower table is connected by means of two plain hard chrome plated columns.
The middle crosshead is fitted on two hard chrome plated threaded columns. A reduction gear motor drives the chain and sprockets fixed at the bottom of the threaded columns for height adjustment.
The cylinder and ram is individually lapped to eliminate friction. Axial loading of the system is ensured by provision of a ball seating under the lower table.
An elongation scale with least count of 1 mm is provided for measurement of displacement of two cross heads.
Tensile test is conducted by gripping the test specimen between the upper and middle cross head. Compression, Transverse, Bending and Shear tests are conducted between the middle crosshead and the lower table.

CONTROL PANEL:
The control panel consists of the hydraulic system, complete with drive motor, oil sump, pendulum dynamometer and the load indicating system.

HYDRAULIC SYSTEM :

The power pack has a directly driven pump which generates a maximum pressure of 200 kgf/cm . The hydraulic pupm produces a continues non- pulsating oil flow. Hence the load application is very smoth. Oil Filter, Oil stainer, Air Breather, oil level indicator and drain plug is provided which controls oil flow to the main cylider. This maintains constant rate of piston movemnt and hence staining rate is kept constant. This valve is hand operated and gives infinitely verialbe oil flow to obtain diffrent rates of straining.

Pendulum dynamometer:
The pressure in the main cylinder actuates the special dynamometer system pressurized oil in the loading cylinder pushes up the measuring piston proportionately and deflects the pendulum. The piston is constantly rotated to eliminate friction. The system has return of pendulum after sudden breakage of test piece. This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces.

Load Indicating system:
This system consists of large dial and a pointer.
Displacement of pendulum actuates the rack and pinion mechanism, which operates the load indicating pointer dial indicating the load. A dummy pointer is provided to register the maximum load reached for easy and clear changing of load range.

Load / Elongation recording system:
A continuous roll (A strip chart) elongation recorder is provided for plotting load-elongation graph. Horizontal movement of the rack produces load ordinate of the diagram and drum rotation to elongation ordinate, in the ration of either 1:5 or 1:10