|
|
Product Catalogue: 0292 |
It is a high performance, fully solid-state, triple output DC power supply, particularly suitable for wide range of industrial and laboratory use involving experimental set-ups and circuit development applications. The two main outputs are continuously variable from 0-32V DC at a maximum of 3A, available through 2 sets of 4mm colour coded terminals, one towards the left and other towards the right of front panel. The variable output sections can be operated in constant voltage or constant current modes, with the unit automatically interchanging between the two modes, which are indicated by separate indicator LEOs. The front panel Voltage and Current control knobs provides for adjustment in output voltage and current respectively. The front panel also has separate 3 digit LED display for each variable section to monitor output voltage or load current, selectable through meter (V / AJ selection switch. The unit also provides a fixed 5V DC output with adjustment facility from 4.5 to 5.5V with a maximum current of 3A along with overload indication. All the outputs are floating, i. e., neither the output positive terminal nor the negative terminal (nor any point within the ,circuitry] is connected to ground. Designed for continuous use. TECHNICAL SPECIFICATIONS
Variable voltage Sections (2 Identical sections) - Output Voltage 0-32V DC, continuously variable
Output Current 0-3A maximum, continuously variable Constant Voltage Mode Operation Line Regulation ±0.01% + 2mV for ± 1 0% line Load Regulation ±0.01% + 2mVfor ± 1 0% load change Ripple & Noise 1 mV _ maximum Constant Current Mode Operation Line Regulation ±0.1% + 250µA for ± 10% line
Load Regulation ± 0.1% + 250µA for change in output voltage from O to maximum. 5V Section - Output Voltage 4.5 - 5. 5V DC with adjustment on front panel, Output Current : 3A maximum with overload indication, Line Regulation : Less than 10mV, Load Regulation : Less than 10mV, Ripple and Noise : 2mV, maximum Load Regulation.
|
|
|
|
