RLC Network Trainer has many functions. RLC Network is used to study the response of an incoming frequency when passed through an RLC Network. RLC Network contributes towards change in amplitude and phase. By using this technique several communications, industrial, commercial circuits are developed.

Using this trainer, it is possible to study 1st order and 2nd order control experiments. It is recommended to use a storage oscilloscope for measurement of rise and fall times of output for a given input frequency, especially for Step input. Alternately, When PID control trainer Model PID-2 is used along with this trainer,, the responses can be captured and used for analysis at a later point of time. PID-2 software permits for analysis for post applications for slow varying inputs.

Since Lissajous figures fall in the scope of frequency measurement, this trainer has all the necessary materials to perform the measurement of frequencies. An oscilloscope is an important requirement to observe such a pattern.

This trainer can also be used to study the resonance circuits also, namely Parallel Resonance, and Series Resonance Circuits.

This trainer has the following facilities:

• In built Sine Wave Generator (having provision to change the frequency in multiples of 1KHz to 10KHz and also to change the amplitude of the waveform)
  
• Assorted value of Resistors (1KW, 10KW, 22KW, 100KW).
  
• PN Junction Diodes (1N4001).
  
• Assorted value of Capacitors (0.01mfd, 0.047mfd, 0.1mfd, 0.47mfd).
  
• Variable Inductance Ranges from (0-10) mH.
  
• Variable Potentiometers (1KW, 10KW).
  
• Instrumentation Amplifier.